Installation

To install the developmental version of the package, run:

install.packages("devtools")
devtools::install_github("omnideconv/SimBu")

To install from Bioconductor:

if (!require("BiocManager", quietly = TRUE)) {
  install.packages("BiocManager")
}

BiocManager::install("SimBu")

library(SimBu)

Introduction

As complex tissues are typically composed of various cell types, deconvolution tools have been developed to computationally infer their cellular composition from bulk RNA sequencing (RNA-seq) data. To comprehensively assess deconvolution performance, gold-standard datasets are indispensable. Gold-standard, experimental techniques like flow cytometry or immunohistochemistry are resource-intensive and cannot be systematically applied to the numerous cell types and tissues profiled with high-throughput transcriptomics. The simulation of ‘pseudo-bulk’ data, generated by aggregating single-cell RNA-seq (scRNA-seq) expression profiles in pre-defined proportions, offers a scalable and cost-effective alternative. This makes it feasible to create in silico gold standards that allow fine-grained control of cell-type fractions not conceivable in an experimental setup. However, at present, no simulation software for generating pseudo-bulk RNA-seq data exists.
SimBu was developed to simulate pseudo-bulk samples based on various simulation scenarios, designed to test specific features of deconvolution methods. A unique feature of SimBu is the modelling of cell-type-specific mRNA bias using experimentally-derived or data-driven scaling factors. Here, we show that SimBu can generate realistic pseudo-bulk data, recapitulating the biological and statistical features of real RNA-seq data. Finally, we illustrate the impact of mRNA bias on the evaluation of deconvolution tools and provide recommendations for the selection of suitable methods for estimating mRNA content.

Getting started

This chapter covers all you need to know to quickly simulate some pseudo-bulk samples!

This package can simulate samples from local or public data. This vignette will work with artificially generated data as it serves as an overview for the features implemented in SimBu. For the public data integration using sfaira (Fischer et al. 2020), please refer to the “Public Data Integration” vignette.

We will create some toy data to use for our simulations; two matrices with 300 cells each and 1000 genes/features. One represents raw count data, while the other matrix represents scaled TPM-like data. We will assign these cells to some immune cell types.

counts <- Matrix::Matrix(matrix(stats::rpois(3e5, 5), ncol = 300), sparse = TRUE)
tpm <- Matrix::Matrix(matrix(stats::rpois(3e5, 5), ncol = 300), sparse = TRUE)
tpm <- Matrix::t(1e6 * Matrix::t(tpm) / Matrix::colSums(tpm))
colnames(counts) <- paste0("cell_", rep(1:300))
colnames(tpm) <- paste0("cell_", rep(1:300))
rownames(counts) <- paste0("gene_", rep(1:1000))
rownames(tpm) <- paste0("gene_", rep(1:1000))
annotation <- data.frame(
  "ID" = paste0("cell_", rep(1:300)),
  "cell_type" = c(
    rep("T cells CD4", 50),
    rep("T cells CD8", 50),
    rep("Macrophages", 100),
    rep("NK cells", 10),
    rep("B cells", 70),
    rep("Monocytes", 20)
  )
)

Creating a dataset

SimBu uses the SummarizedExperiment class as storage for count data as well as annotation data. Currently it is possible to store two matrices at the same time: raw counts and TPM-like data (this can also be some other scaled count matrix, such as RPKM, but we recommend to use TPMs). These two matrices have to have the same dimensions and have to contain the same genes and cells. Providing the raw count data is mandatory!
SimBu scales the matrix that is added via the tpm_matrix slot by default to 1e6 per cell, if you do not want this, you can switch it off by setting the scale_tpm parameter to FALSE. Additionally, the cell type annotation of the cells has to be given in a dataframe, which has to include the two columns ID and cell_type. If additional columns from this annotation should be transferred to the dataset, simply give the names of them in the additional_cols parameter.

To generate a dataset that can be used in SimBu, you can use the dataset() method; other methods exist as well, which are covered in the “Inputs & Outputs” vignette.

ds <- SimBu::dataset(
  annotation = annotation,
  count_matrix = counts,
  tpm_matrix = tpm,
  name = "test_dataset"
)
#> Filtering genes...
#> Created dataset.

SimBu offers basic filtering options for your dataset, which you can apply during dataset generation:

filter_genes: if TRUE, genes which have expression values of 0 in all cells will be removed.
variance_cutoff: remove all genes with a expression variance below the chosen cutoff.
type_abundance_cutoff: remove all cells, which belong to a cell type that appears less the the given amount.

Simulate pseudo bulk datasets

We are now ready to simulate the first pseudo bulk samples with the created dataset:

simulation <- SimBu::simulate_bulk(
  data = ds,
  scenario = "random",
  scaling_factor = "NONE",
  ncells = 100,
  nsamples = 10,
  BPPARAM = BiocParallel::MulticoreParam(workers = 4), # this will use 4 threads to run the simulation
  run_parallel = TRUE
) # multi-threading to TRUE
#> Using parallel generation of simulations.
#> Finished simulation.

ncells sets the number of cells in each sample, while nsamples sets the total amount of simulated samples.
If you want to simulate a specific sequencing depth in your simulations, you can use the total_read_counts parameter to do so. Note that this parameter is only applied on the counts matrix (if supplied), as TPMs will be scaled to 1e6 by default.

SimBu can add mRNA bias by using different scaling factors to the simulations using the scaling_factor parameter. A detailed explanation can be found in the “Scaling factor” vignette.

Currently there are 6 scenarios implemented in the package:

even: this creates samples, where all existing cell-types in the dataset appear in the same proportions. So using a dataset with 3 cell-types, this will simulate samples, where all cell-type fractions are 1/3. In order to still have a slight variation between cell type fractions, you can increase the balance_uniform_mirror_scenario parameter (default to 0.01). Setting it to 0 will generate simulations with exactly the same cell type fractions.
random: this scenario will create random cell type fractions using all present types for each sample. The random sampling is based on the uniform distribution.
mirror_db: this scenario will mirror the exact fractions of cell types which are present in the provided dataset. If it consists of 20% T cells, 30% B cells and 50% NK cells, all simulated samples will mirror these fractions. Similar to the uniform scenario, you can add a small variation to these fractions with the balance_uniform_mirror_scenario parameter.
weighted: here you need to set two additional parameters for the simulate_bulk() function: weighted_cell_type sets the cell-type you want to be over-representing and weighted_amount sets the fraction of this cell-type. You could for example use B-cell and 0.5 to create samples, where 50% are B-cells and the rest is filled randomly with other cell-types.
pure: this creates simulations of only one single cell-type. You have to provide the name of this cell-type with the pure_cell_type parameter.
custom: here you are able to create your own set of cell-type fractions. When using this scenario, you additionally need to provide a dataframe in the custom_scenario_data parameter, where each row represents one sample (therefore the number of rows need to match the nsamples parameter). Each column has to represent one cell-type, which also occurs in the dataset and describes the fraction of this cell-type in a sample. The fractions per sample need to sum up to 1. An example can be seen here:

pure_scenario_dataframe <- data.frame(
  "B cells" = c(0.2, 0.1, 0.5, 0.3),
  "T cells" = c(0.3, 0.8, 0.2, 0.5),
  "NK cells" = c(0.5, 0.1, 0.3, 0.2),
  row.names = c("sample1", "sample2", "sample3", "sample4")
)
pure_scenario_dataframe
#>         B.cells T.cells NK.cells
#> sample1     0.2     0.3      0.5
#> sample2     0.1     0.8      0.1
#> sample3     0.5     0.2      0.3
#> sample4     0.3     0.5      0.2

Results

The simulation object contains three named entries:

bulk: a SummarizedExperiment object with the pseudo-bulk dataset(s) stored in the assays. They can be accessed like this:

utils::head(SummarizedExperiment::assays(simulation$bulk)[["bulk_counts"]])
#> 6 x 10 sparse Matrix of class "dgCMatrix"
#>   [[ suppressing 10 column names 'random_sample1', 'random_sample2', 'random_sample3' ... ]]
#>                                               
#> gene_1 443 499 486 456 466 488 513 500 473 509
#> gene_2 519 542 522 500 530 551 525 561 540 521
#> gene_3 498 501 475 495 494 438 428 434 517 471
#> gene_4 523 567 532 509 544 541 532 527 517 531
#> gene_5 486 476 500 498 471 472 500 461 504 445
#> gene_6 505 506 475 517 518 483 455 469 526 481
utils::head(SummarizedExperiment::assays(simulation$bulk)[["bulk_tpm"]])
#> 6 x 10 sparse Matrix of class "dgCMatrix"
#>   [[ suppressing 10 column names 'random_sample1', 'random_sample2', 'random_sample3' ... ]]
#>                                                                             
#> gene_1 1024.9217  998.6273 1019.9336 1028.1184 1005.2763 1131.3659  969.2027
#> gene_2 1063.3196  959.7818 1035.1338  988.7570  998.9599 1046.5208 1029.9806
#> gene_3 1059.1694  994.2399 1129.5234  997.3121 1035.3689 1135.3664  999.3213
#> gene_4  974.1049 1031.1912 1043.9906 1016.8959  960.3403 1008.8948  967.4178
#> gene_5  996.4749 1015.6947  970.7028 1017.8238  982.6074  948.2666  993.6808
#> gene_6 1003.5164  973.4076 1156.4558 1011.1897  980.5042  994.1145 1065.0276
#>                                     
#> gene_1  994.5985 1077.6620  933.3201
#> gene_2  955.1392 1122.6000 1097.9496
#> gene_3 1009.0734  991.6217  947.8717
#> gene_4  936.0687  924.6385  972.3386
#> gene_5 1011.7292 1008.6263 1044.1575
#> gene_6  958.2737  959.3239 1043.6834

If only a single matrix was given to the dataset initially, only one assay is filled.

cell_fractions: a table where rows represent the simulated samples and columns represent the different simulated cell-types. The entries in the table store the specific cell-type fraction per sample.
scaling_vector: a named list, with the used scaling value for each cell from the single cell dataset.

It is also possible to merge simulations:

simulation2 <- SimBu::simulate_bulk(
  data = ds,
  scenario = "even",
  scaling_factor = "NONE",
  ncells = 1000,
  nsamples = 10,
  BPPARAM = BiocParallel::MulticoreParam(workers = 4),
  run_parallel = TRUE
)
#> Using parallel generation of simulations.
#> Finished simulation.
merged_simulations <- SimBu::merge_simulations(list(simulation, simulation2))

Finally here is a barplot of the resulting simulation:

SimBu::plot_simulation(simulation = merged_simulations)
#> Warning: `aes_string()` was deprecated in ggplot2 3.0.0.
#> ℹ Please use tidy evaluation idioms with `aes()`.
#> ℹ See also `vignette("ggplot2-in-packages")` for more information.
#> ℹ The deprecated feature was likely used in the SimBu package.
#>   Please report the issue at <https://github.com/omnideconv/SimBu/issues>.
#> This warning is displayed once per session.
#> Call `lifecycle::last_lifecycle_warnings()` to see where this warning was
#> generated.

More features

Simulate using a whitelist (and blacklist) of cell-types

Sometimes, you are only interested in specific cell-types (for example T cells), but the dataset you are using has too many other cell-types; you can handle this issue during simulation using the whitelist parameter:

simulation <- SimBu::simulate_bulk(
  data = ds,
  scenario = "random",
  scaling_factor = "NONE",
  ncells = 1000,
  nsamples = 20,
  BPPARAM = BiocParallel::MulticoreParam(workers = 4),
  run_parallel = TRUE,
  whitelist = c("T cells CD4", "T cells CD8")
)
#> Using parallel generation of simulations.
#> Finished simulation.
SimBu::plot_simulation(simulation = simulation)

In the same way, you can also provide a blacklist parameter, where you name the cell-types you don’t want to be included in your simulation.

utils::sessionInfo()
#> R version 4.6.0 (2026-04-24)
#> Platform: x86_64-pc-linux-gnu
#> Running under: Ubuntu 24.04.4 LTS
#> 
#> Matrix products: default
#> BLAS:   /usr/lib/x86_64-linux-gnu/openblas-pthread/libblas.so.3 
#> LAPACK: /usr/lib/x86_64-linux-gnu/openblas-pthread/libopenblasp-r0.3.26.so;  LAPACK version 3.12.0
#> 
#> locale:
#>  [1] LC_CTYPE=en_US.UTF-8       LC_NUMERIC=C              
#>  [3] LC_TIME=en_US.UTF-8        LC_COLLATE=en_US.UTF-8    
#>  [5] LC_MONETARY=en_US.UTF-8    LC_MESSAGES=en_US.UTF-8   
#>  [7] LC_PAPER=en_US.UTF-8       LC_NAME=C                 
#>  [9] LC_ADDRESS=C               LC_TELEPHONE=C            
#> [11] LC_MEASUREMENT=en_US.UTF-8 LC_IDENTIFICATION=C       
#> 
#> time zone: Etc/UTC
#> tzcode source: system (glibc)
#> 
#> attached base packages:
#> [1] stats     graphics  grDevices utils     datasets  methods   base     
#> 
#> other attached packages:
#> [1] SimBu_1.14.0   rmarkdown_2.31
#> 
#> loaded via a namespace (and not attached):
#>  [1] sass_0.4.10                 generics_0.1.4             
#>  [3] tidyr_1.3.2                 SparseArray_1.12.2         
#>  [5] lattice_0.22-9              digest_0.6.39              
#>  [7] magrittr_2.0.5              RColorBrewer_1.1-3         
#>  [9] evaluate_1.0.5              sparseMatrixStats_1.24.0   
#> [11] grid_4.6.0                  fastmap_1.2.0              
#> [13] jsonlite_2.0.0              Matrix_1.7-5               
#> [15] proxyC_0.5.2                purrr_1.2.2                
#> [17] scales_1.4.0                codetools_0.2-20           
#> [19] jquerylib_0.1.4             abind_1.4-8                
#> [21] cli_3.6.6                   rlang_1.2.0                
#> [23] XVector_0.52.0              Biobase_2.72.0             
#> [25] withr_3.0.2                 cachem_1.1.0               
#> [27] DelayedArray_0.38.2         yaml_2.3.12                
#> [29] otel_0.2.0                  S4Arrays_1.12.0            
#> [31] tools_4.6.0                 parallel_4.6.0             
#> [33] BiocParallel_1.46.0         dplyr_1.2.1                
#> [35] ggplot2_4.0.3               SummarizedExperiment_1.42.0
#> [37] BiocGenerics_0.58.1         buildtools_1.0.0           
#> [39] vctrs_0.7.3                 R6_2.6.1                   
#> [41] matrixStats_1.5.0           stats4_4.6.0               
#> [43] lifecycle_1.0.5             Seqinfo_1.2.0              
#> [45] S4Vectors_0.50.1            IRanges_2.46.0             
#> [47] pkgconfig_2.0.3             gtable_0.3.6               
#> [49] pillar_1.11.1               bslib_0.11.0               
#> [51] data.table_1.18.4           glue_1.8.1                 
#> [53] Rcpp_1.1.1-1.1              tidyselect_1.2.1           
#> [55] tibble_3.3.1                xfun_0.57                  
#> [57] GenomicRanges_1.64.0        sys_3.4.3                  
#> [59] MatrixGenerics_1.24.0       knitr_1.51                 
#> [61] farver_2.1.2                htmltools_0.5.9            
#> [63] labeling_0.4.3              maketools_1.3.2            
#> [65] compiler_4.6.0              S7_0.2.2

References

Fischer, David S., Leander Dony, Martin König, et al. 2020. “Sfaira Accelerates Data and Model Reuse in Single Cell Genomics.” bioRxiv, ahead of print. https://doi.org/10.1101/2020.12.16.419036.

Getting started with SimBu